Tailings Engineering

Centerline Raise Dam Raise Volume Calculator

Centerline Raise Dam Raise Volume Calculator engineering calculator.

Quick Answer

Calculate Centerline Raise Dam Raise Volume Calculator

Calculator

Raise volume (m³)
—

Result Interpretation

Centerline Raise Dam Raise Volume Calculator computes Raise volume in m^3 using the defined engineering formula and the input values provided.

Worked Example

Verified calculation

Given:

  • Dam centerline length = 300
  • Raise height = 2
  • Crest width = 6
  • Downstream slope ratio (H:V) = 2
  • Upstream slope ratio (H:V) = 3

Expected Result:

  • Raise volume = 4100

Engineering Interpretation:

Under the given input conditions, the calculated result is: Raise volume = 4100 m^3.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

raise volume = (crest width * raise height + 0.5 * raise height * raise height * (1/H:V + 1/H:V)) * dam centerline length

Formula family: formula_tailings_centerline_raise_dam_raise_volume_calculator

Variables

SymbolLabelRoleDescription
w_crest Crest width INPUT Crest width
h_raise Raise height INPUT Raise height
slope_us Upstream slope ratio (H:V) INPUT Upstream slope ratio (H:V)
slope_ds Downstream slope ratio (H:V) INPUT Downstream slope ratio (H:V)
length Dam centerline length INPUT Dam centerline length
Raise volume Raise volume OUTPUT Raise volume

Calculation Steps

  1. Enter the crest width in m.
  2. Enter the raise height in m.
  3. Enter the upstream slope ratio (h:v) in dimensionless.
  4. Enter the downstream slope ratio (h:v) in dimensionless.
  5. Enter the dam centerline length in m.
  6. Step 1: Compute raise volume.
  7. Read the raise volume (m^3) from the results.

Engineering Summary

Calculate Centerline Raise Dam Raise Volume Calculator

Frequently Asked Questions

What does this calculator calculate?

The Centerline Raise Dam Raise Volume Calculator estimates Raise volume based on the input parameters you provide

Why is crest width important in this calculation?

crest width is directly proportional to raise volume. When you enter crest width in m, the calculator uses it in the engineering formula to compute the output

How should I interpret the result raise volume?

The calculator outputs raise volume in m^3. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Crest width (m), Raise height (m), Upstream slope ratio (H:V) (dimensionless), Downstream slope ratio (H:V) (dimensionless), Dam centerline length (m). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Browse More Tools

Explore the full index of engineering calculators on this vertical site.